How to Update Bash Version on MAC

Hi,

Another post, just share some experience. Forthose whom a bit extreme users. Here how to update your bash version. Here we go...

This is all what you need:
1. Apple XCode, you can download by yourself from apple website.
2. Bash 4.1

This is how to do
01. tar -xzvf bash-4.1.tar.gz
02. 'su -' or 'sudo -s' -> you must have root previlage
03. cd bash-4.1
04. ./configure && make && make install
05. chsh -s /usr/local/bin/bash user_name
06. sudo bash -c "echo /usr/local/bin/bash >> /private/etc/shells"
07. Close your terminal & open it again
08. type in 'help' it should have the bash version on the top if it's already 4.1
09. 'su -' or 'sudo -s'
10. cd /bin
11. mv bash bash_old
12. ln -s /usr/local/bin/bash bash

Enjoy your new Bash..

Regards,
феникс

Gnome on OpenBSD 4.8

Hi,

Everyone comes another update this one is just how to enable GNOME on your OpenBSD 4.8

OpenBSD Repositories

1. Make your live easier, by installing nano
# pkg_add -r http://ftp.openbsd.org/pub/OpenBSD/4.8/packages/i386/nano-2.2.4.tgz
# echo 'set nowrap' > /root/.nanorc

Do on your user also
$ echo 'set nowarp' > /home/your_username/.nanorc

2. Using root previlages, add this to your machine
# pkg_add -r http://ftp.openbsd.org/pub/OpenBSD/4.8/packages/i386/gdm-2.20.11p1.tgz
# pkg_add -r http://ftp.openbsd.org/pub/OpenBSD/4.8/packages/i386/metacity-2.30.1p1.tgz
# pkg_add -r http://ftp.openbsd.org/pub/OpenBSD/4.8/packages/i386/gnome-panel-2.30.2p2.tgz
# pkg_add -r http://ftp.openbsd.org/pub/OpenBSD/4.8/packages/i386/nautilus-2.30.1p2.tgz
# pkg_add -r http://ftp.openbsd.org/pub/OpenBSD/4.8/packages/i386/gnome-terminal-2.30.2p0.tgz
# pkg_add -r http://ftp.openbsd.org/pub/OpenBSD/4.8/packages/i386/gnome-themes-2.30.2.tgz
# pkg_add -r http://ftp.openbsd.org/pub/OpenBSD/4.8/packages/i386/gnome-themes-extras-2.22.0p8.tgz
# pkg_add -r http://ftp.openbsd.org/pub/OpenBSD/4.8/packages/i386/gnome-utils-2.30.0p0.tgz
# pkg_add -r http://ftp.openbsd.org/pub/OpenBSD/4.8/packages/i386/gnome-control-center-2.30.1p0.tgz
# pkg_add -r http://ftp.openbsd.org/pub/OpenBSD/4.8/packages/i386/gnome-settings-daemon-2.30.2p1.tgz
# pkg_add -r http://ftp.openbsd.org/pub/OpenBSD/4.8/packages/i386/gnome-menus-2.30.2p0.tgz

3. Assume you already download the files in the top, do this
# nano /etc/rc.local

add this the following lines in the bottom

-----------------------------------------------------

if [ -x /usr/local/sbin/gdm ]; then

echo -n ' gdm'; (sleep 5; /usr/local/sbin/gdm) &

fi

----------------------------------

# echo 'exec gnome-session' > /root/.xinitrc

# chmod +x /root/.xinitrc

under your user account do the same thing

$ echo 'exec gnome-session' > /home/your_username/.xinitrc

$ chmod +x /home/your_username/.xinitrc

4. Next do this to make it works
# nano /etc/rc.conf.local

add this following lines in the bottom

-----------------------------------------------------

gnome_enable=YES

gdm_enable=YES

----------------------------------

5. Enjoy your Gnome.

Regards,
феникс

How To Make Realtek RTL8191SE Work on Slackware

Realtek RTL8191SE is figured below :

• What you need is the realtek driver. You can download it form Realtek Driver for Linux.
• Uncompress it.
tar -xzvf filename.tar.gz
• Go to the directory
• Just simple make and make install

After this you will notice the wifi not up, you need to init 6

After reboot your machine, you can type in
# iwconfig  --> you should see RTL8191SE as your wlan0
# ifconfig wlan0 up -> It will bring up your wifi card
# iwlist wlan0 scan -> Scan network around you.
# iwconfig essid "NetworkName" key "YourKey" -> Join your network
# dhcpcp -d -> got DHCP address.

That's all, will share another thing later :)

Regards,
феникс

Enable local / remote error messages for classic ASP under IIS7

By default ASP error messages are hidden behind a really useful 500 message under IIS7.
You can go into the GUI -> Your site -> ASP -> Debugging Properties -> Send Errors to Browser -> True
but that doesn’t seem to help you remotely. You need to do this (remember, don’t do this on a production server):
Start -> Accessories -> Right Click Command Prompt and then Run as Administrator, then do the following:

CD C:\Windows\System32\Inetsrv

appcmd set config -section:asp -scriptErrorSentToBrowser:true

appcmd set config -section:system.webServer/httpErrors -errorMode:Detailed

Regards,
феникс

Make Macbook White Early 2009 on 64 Bit

Hi,

All this is my experience to change Macbook White Early 2009 to load using 64Bit Kernel, under Snow Leopard 10.6.3.

Below is the Mac specification :

Model	Early 2009
Release Date	21st Jan 2009
Model Numbers	MB881*/A
Machine Model	MacBook5,2
Display	13.3" glossy widescreen LCD, 1280 x 800 pixel resolution
FSB	1066 MHz
Processor	2.0 GHz Intel Core 2 Duo (P7350)
Memory	2 GB (two 1 GB) 667 MHz PC2-5300 Expandable to 4 GB
Graphics	nVidia GeForce 9400M using 256 MB RAM
HardDrive	120 GB Optional 160 GB, 250 GB, or 320 GB
AirPort Exteme	Integrated 802.11a/b/g and draft-n (n enabled)
Internal Slot-Loading	4× DVD+R DL writes, 8× DVD±R read, 4× DVD±RW writes, 24× CD-R, and 10x CD-RW recording
OS	Mac OS X v10.5.4
Weight	5.0 lb/2.3 kg
Dimension	1.08 x 12.78 x 8.92 in/27.5 x 325 x 227 mm

First do this thing to check whether the Mac is supported or not :
$ ioreg -p IODeviceTree -w0 -l | grep firmware-abi
$ | |   "firmware-abi" = <"EFI64">

If you get "EFI 64". It's mean your MacBook is supported.

$sudo -s  --> make you come a root BE CAREFULL!!!

#cd /User/yourusername/Downloads/
#cp boot64.efi /System/Library/CoreServices/
#cd /System/Library/CoreServices/
#chown root:wheel boot64.efi
#chflags uchg boot64.efi

#bless --folder /System/Library/CoreServices --file /System/Library/CoreServices/boot64.efi

After it's done, still under root go to :

#vi /Library/Preferences/SystemConfiguration/com.apple.Boot.plist

press 'i' then add this 'arch=x86_64'.

Kernel Flags
arch=x86_64


Press 'esc' and the type ':wq' then restart the machine immediately 'shutdown -r now'. It will take quite long time for the first loading.







If the Mac comes withe problem before you go in, then just insert your installation disk then open terminal. Type in :


sudo bless --folder /Volumes/VolumesNames/System/Library/CoreServices --file /Volumes/VolumesNames/System/Library/CoreServices/boot.efi


Restart the machine after that it will works normal.


File you need to dowload:


1. boot64.efi files
2. HexEdit Just in case do you needed.


Regards,
феникс

DRBD Server with OpenVZ

Installing DRBD with OpenVZ (CentOS 5.3) by 林观生

==========================================================

20GB for /

40GB for /vz

260GB for drbd device -> don’t do anything just put as a software raid.



Install CentOS 5.3 as an usual

turn off the iptables and selinux

#turn off firewall

chkconfig iptables off



#update the OS

yum -y update



#restart first so will bootup wih the kernel if they have kernel update

shutdown -r now



#crontab

yum -y install vixie-cron ntp

/usr/sbin/ntpdate sg.pool.ntp.org

crontab -e

30 03 * * * /usr/sbin/ntpdate sg.pool.ntp.org



#OpenVZ

cd /etc/yum.repos.d

wget http://download.openvz.org/openvz.repo

rpm —import http://download.openvz.org/RPM-GPG-Key-OpenVZ

yum search ovzkernel

yum install ovzkernel.i686

yum install ovzkernel-devel.i686





vi /boot/grub/grub.conf (Edit File)

—-

…

default 0

…

title OpenVZ (See Kernel which countain stab)

…

—-



vi /etc/sysctl.conf (Edit File)

—-

# packet forwarding enabled and proxy arp disabled

net.ipv4.ipforward = 1

net.ipv4.conf.default.proxyarp = 0




# Controls source route verification

net.ipv4.conf.default.rpfilter = 1




# Do not accept source routing

net.ipv4.conf.default.acceptsourceroute = 0




# Controls the System Request debugging functionality of the kernel

kernel.sysrq = 1




# we do not want all our interfaces to send redirects

net.ipv4.conf.default.sendredirects = 1

net.ipv4.conf.all.sendredirects = 0




# Controls whether core dumps will append the PID to the core filename.

# Useful for debugging multi-threaded applications.

kernel.coreusespid = 1

—-



yum -y install vzctl vzquota



Reboot the machine, use the new kernel (Contain OpenVZ)

shutdown -r now





vi /etc/fstab




…

/dev/md1 /vz.orig ext3 defaults 1 2

…





Install HeartBeat

==========================================================

yum search heartbeat

yum -y install heartbeat.i386 heartbeat-devel.i386

yum -y install heartbeat



Create 3 files on both side

—————————————————————————————-



1)vi ha.cf (Create File)

—————-

logfile /var/log/ha-log

logfacility local0

uselogd yes

node server1

node server2

keepalive 2

deadtime 10

initdead 120

udpport 694

bcast eth1

autofailback yes

respawn hacluster /usr/lib/heartbeat/ipfail

—————-



2)vi haresources (Create File

————————-

server1 192.168.1.155 \

drbddisk::r0 Filesystem::/dev/drbd0::/vz::ext3 \

openvz

————————-



3) vi authkeys (Create File)

—————-

auth 1

1 crc

—————-



chmod 600 /etc/ha.d/authkeys



/etc/init.d/heartbeat start



#put as the startup

chkconfig —add heartbeat

chkconfig heartbeat on

chkconfig —list | grep ‘heartbeat’



++++++++++++++++++++++++++++++++

heartbeat 0:off 1:off 2:on 3:on 4:on 5:on 6:off

++++++++++++++++++++++++++++++++



#Do ifconfig command should be show like this

….

eth0:0 Link encap:Ethernet HWaddr 00:1A:92:1C:C4:E8

inet addr:192.168.1.199 Bcast:192.168.1.255 Mask:255.255.255.0

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

Interrupt:169

…..



#Turn down one machine make it sure the floating IP is moved.





Install DRBD

==========================================================

search DRBD Pakcage

yum search drbd



#If you want configure the kernel header manual don’t install the kmod

yum -y install drbd82.i686 kmod-drbd82.i686



#restart the machine

shutdown -r now



mdadm —create -l 1 -n 2 /dev/md2 /dev/sda3 /dev/sdb3



vi /etc/drbd.conf (Edit File)



—————————————————————————————————————

global {

usage-count yes;

}

common {

protocol C;

syncer { rate 100M; } --> Put in this rate or it will take quite long time.

}

resource r0 {

device /dev/drbd0;

disk /dev/md2;

meta-disk internal;

on server1 {

address 15.5.19.87:7789;

}

on server2 {

address 15.5.19.88:7789;

}

}

——————————————————————————————————————



#add DRBD to metadata

drbdadm create-md r0

drbdadm attach r0

drbdadm syncer r0

drbdadm connect r0

cat /proc/drbd



==========================================================

+version: 8.2.6 (api:88/proto:86-88) ++GIT-hash: 3e69822d3bb4920a8c1bfdf7d647169eba7d2eb4 build by pavel@xemulnb.sw.ru, 2008-09-30 17:46:13 ++ 0: cs:Connected st:Primary/Secondary ds:Inconsistent/Inconsistent C r—- ++ ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 oos:0 +

==========================================================

#do this on your primary machine (Master)

drbdadm — —overwrite-data-of-peer primary r0



++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

|version: 8.2.6 (api:88/proto:86-88) ||GIT-hash: 3e69822d3bb4920a8c1bfdf7d647169eba7d2eb4 build by pavel@xemulnb.sw.ru, 2008-09-30 17:46:13 || 0: cs:SyncTarget st:Secondary/Primary ds:Inconsistent/UpToDate C r—- || ns:0 nr:75266976 dw:75259232 dr:0 al:0 bm:4592 lo:243 pe:472 ua:242 ap:0 oos:170495532 || [=====>…………..] sync’ed: 30.7% (166499/239994)M || finish: 0:35:38 speed: 79,604 (58,520) K/sec |

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++





Configure DRBD that it can works with OpenVZ

===========================================================

#turn off the VZ service —> will be turn it on bt the script

chkconfig vz off



/etc/init.d/drbd status



#make sure the drbd drive mounted to vz directory.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

|version: 8.2.6 (api:88/proto:86-88) || GIT-hash: 3e69822d3bb4920a8c1bfdf7d647169eba7d2eb4 build by pavel@xemulnb.sw.ru, 2008-09-30 17:46:13 ||m:res cs st ds p mounted fstype ||0:r0 Connected Primary/Secondary UpToDate/UpToDate C /vz ext3 |

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++



mv /etc/vz /etc/vz.orig

mv /etc/sysconfig/vz-scripts /etc/sysconfig/vz-scripts.orig

mv /var/vzquota /var/vzquota.orig

ln -s /vz/cluster/etc/vz /etc/vz

ln -s /vz/cluster/etc/sysconfig/vz-scripts /etc/sysconfig/vz-scripts

ln -s /vz/cluster/var/vzquota /var/vzquota



#do this only in primary

cp -a /vz.orig/* /vz/

mkdir -p /vz/cluster/etc

mkdir -p /vz/cluster/etc/sysconfig

mkdir -p /vz/cluster/var

cp -a /etc/vz.orig /vz/cluster/etc/vz/

cp -a /etc/sysconfig/vz-scripts.orig /vz/cluster/etc/sysconfig/vz-scripts

cp -a /var/vzquota.orig /vz/cluster/var/vzquota



#do this on both side



mkdir /root/live-switchover

ln -s /root/live-switchover/openvz /etc/init.d/



#Copy the 4 script to /root/live-switchover & put chmod 755 to all files.



restart the machine



^^ DRBD works…



Install OpenVZ

==========================================================

vzsplit -n 1 -f vps.1

cd /vz/template/cache/

wget http://download.openvz.org/contrib/template/precreated/centos-5-i386-default.tar.gz



vzctl create 1001 —ostemplate centos-5-i386-default —config vps.1

vzctl set 1001 —onboot yes —save

vzctl set 1001 —hostname server11.netdns.net —save

vzctl set 1001 —ipadd 20x.xxx.xxx.xxx —save

vzctl set 1001 —nameserver 208.67.220.220 —save



#manual config use this file

vi /etc/vz/conf/1001.conf



# highest upper limit

vzctl set 1001 —kmemsize 2147483647:2147483647 —save

vzctl set 1001 —lockedpages 2147483647:2147483647 —save

vzctl set 1001 —privvmpages 2147483647:2147483647 —save

vzctl set 1001 —shmpages 2147483647:2147483647 —save

vzctl set 1001 —numproc 2147483647:2147483647 —save

vzctl set 1001 —numtcpsock 2147483647:2147483647 —save

vzctl set 1001 —numflock 2147483647:2147483647 —save

vzctl set 1001 —numpty 2147483647:2147483647 —save

vzctl set 1001 —numsiginfo 2147483647:2147483647 —save

vzctl set 1001 —tcpsndbuf 2147483647:2147483647 —save

vzctl set 1001 —tcprcvbuf 2147483647:2147483647 —save

vzctl set 1001 —othersockbuf 2147483647:2147483647 —save

vzctl set 1001 —dgramrcvbuf 2147483647:2147483647 —save

vzctl set 1001 —numothersock 2147483647:2147483647 —save

vzctl set 1001 —dcachesize 2147483647:2147483647 —save

vzctl set 1001 —numfile 2147483647:2147483647 —save

vzctl set 1001 —numiptent 2147483647:2147483647 —save

vzctl set 1001 —diskspace 1423360000:1433600000 —save

vzctl set 1001 —diskinodes 1390000000:1400000000 —save





# start VPS

vzctl start 1001



# chk status

vzctl status 1001



# vzctl exec allows executing any commands in the Virtual Private Server context.

vzctl exec 1001 ping localhost



Regards,

феникс

How To Install OpenVZ on OpenSUSE

#Check all the control panel under
yast2

#Do update using this command
zypper update

#Before installation put the VZ partition to /srv/vz

Install OpenVZ under openSUSE - Do this part carefully
=========================================================================

#First step go to zypper repo
cd /etc/zypp/repos.d

#Do this
vi openvz-kernel.repo

+++ type this contain

[openVZ-kernel]
name=OpenVZ-Kernel-2.6.27
enable=1
autorefresh=1
baseurl=http://download.opensuse.org/repositories/Virtualization%3a/OpenVZ%3a/kernel-2.6.27/openSUSE_11.1/
path=/
type=rpm-md
keeppackages=0

+++

vi openvz-tool.repo

+++ type this contain

[openvz-tool]
name=OpenVZ-Tools
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/repositories/Virtualization:/OpenVZ:/tools/openSUSE_11.1/
path=/
type=rpm-md
keeppackages=0

+++

#Refresh the zypper
zypper-refresh

#Install using yast, dont using zypper
yast2 ->  Software Management -> type ovz -> install all openVZ, don't install kernel-ovz-syms

#Check the bootloader make it sure the kernel correct, if >3.25GB using OVZ-PAE

#Edit some config
vi /etc/systctl.conf

+++

# Disable response to broadcasts.
# You don't want yourself becoming a Smurf amplifier.
net.ipv4.icmp_echo_ignore_broadcasts = 1
# enable route verification on all interfaces
net.ipv4.conf.all.rp_filter = 1
# enable ipV6 forwarding
#net.ipv6.conf.all.forwarding = 1
# increase the number of possible inotify(7) watches
fs.inotify.max_user_watches = 65536
# avoid deleting secondary IPs on deleting the primary IP
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1

net.ipv4.conf.all.forwarding = 1
net.ipv4.conf.default.forwarding = 1
net.ipv4.conf.all.proxy_arp = 1
net.ipv4.conf.default.proxy_arp = 1
net.ipv6.conf.default.forwarding = 1
net.ipv6.conf.all.forwarding = 1
net.ipv6.conf.default.proxy_ndp = 1
net.ipv6.conf.all.proxy_ndp = 1
net.ipv4.conf.all.rp_filter = 1
net.ipv4.icmp_echo_ignore_broadcasts= 1
kernel.sysrq = 1

++++

vi /etc/vz/vz.conf

+++

NEIGHBOUR_DEVS=all

+++

#Restart the machine using new kernel
shutdown -r now

# Start VZ Service

/etc/init.d/vz start
if give you an error, make it sure the ipv6 is enabled, otherwise try modprobe ipv6

#Add VZ service to start-up

chkconfig --add vz
chkconfig vz on

zypper install vzctl vzquota

lsmod | grep vz

===================Shoud Give You This============================
+vzethdev               24704  0 +
+vznetdev               30212  2 +
+vzrst                 133268  0 +
+vzcpt                 117540  0 +
+tun                    27012  2 vzrst,vzcpt +
+vzdquota               51712  1 [permanent] +
+vzmon                  39308  5 vzethdev,vznetdev,vzrst,vzcpt +
+vzdev                  19336  4 vzethdev,vznetdev,vzdquota,vzmon+
+ipv6                  241828  47 vzrst,vzcpt,vzmon +
==================Yippie openVZ Working===========================


Create openVZ Host
=========================================================================
cd /srv/vz/template/cache
wget http://download.openvz.org/template/precreated/contrib/centos-5-i386-default-5.3-20090803.tar.gz

#VZ Insallation

vzsplit -n 1 -f vps.1
vzctl create 101 --ostemplate centos-5-i386-default-5.3-20090803 --config vps.1
vzctl set 101 --onboot yes --save
vzctl set 101 --hostname S1SmNaNnLx21v.netdns.net --save
vzctl set 101 --ipadd 202.157.142.61 --save
vzctl set 101 --nameserver 165.21.83.88 --save

# highest upper limit
vzctl set 101 --kmemsize 2147483647:2147483647 --save
vzctl set 101 --lockedpages 2147483647:2147483647 --save
vzctl set 101 --privvmpages 2147483647:2147483647 --save
vzctl set 101 --shmpages 2147483647:2147483647 --save
vzctl set 101 --numproc 2147483647:2147483647 --save
vzctl set 101 --numtcpsock 2147483647:2147483647 --save
vzctl set 101 --numflock 2147483647:2147483647 --save
vzctl set 101 --numpty 2147483647:2147483647 --save
vzctl set 101 --numsiginfo 2147483647:2147483647 --save
vzctl set 101 --tcpsndbuf 2147483647:2147483647 --save
vzctl set 101 --tcprcvbuf 2147483647:2147483647 --save
vzctl set 101 --othersockbuf 2147483647:2147483647 --save
vzctl set 101 --dgramrcvbuf 2147483647:2147483647 --save
vzctl set 101 --numothersock 2147483647:2147483647 --save
vzctl set 101 --dcachesize 2147483647:2147483647 --save
vzctl set 101 --numfile 2147483647:2147483647 --save
vzctl set 101 --numiptent 2147483647:2147483647 --save
vzctl set 101 --diskspace 1423360000:1433600000 --save
vzctl set 101 --diskinodes 1390000000:1400000000 --save

Regards,
феникс

Install SnowLeopard with Vanila Kernel

Hi everyone,

Just to share with you all, how to install SnowLeo 10.6 with vanilla kernel.

This is my PC specification :

• Intel Core 2 Duo E7600
• ASUS P5BV with BIOS ver. 0402
• 8 GB DDR2 PC6400
• Geforce 8400GS 512MB
• Samsung SyncMaster 2033 1600x900
• Sound Blaster Live! 24bit
• 1 x Seagate 160GB
• 1 x Seagate 200GB
• 2 x Seagate 250GB

The First thing you need is :

1. Any OSX server can be installed, I suggest iAtkos v7 - you can find this on the website or torrent the file.
2. USB FlashDisk 8GB.
3. SnowLeopard Retail 10.6 ISO file - You can find this on the website or torrent it or buy the retail one.
4. Download this two files : My Hack Installer or myHack Web, ATools, and PCI Efi 10.5
5. This one is optional if you using Sound Blaster Live! 24 bit.

Here we go :

1st Step Prepare your USB Drive:

• 'Utilities'->;'Disk Utility'
• Plug the USB flash drive. It should be at least of 8 GB capacity.
• Partition GUID with only one partition schema, formatted as Mac OS Plus (journaled). Labeled it with any name.
• Mount the original Snow Leopard ISO image
• Back in Disk Utility and in the Restore tab of the created partition, drag and drop the "Mac OS Install DVD" volume to the source field and your USB FlashDisk as the destination. We've just erased the flash drive, so there's no need to check the box "Erase destination".
• Wait until Finish it will take around 20-30 minutes.

2nd Step Install myHack to your USB

• Mount myHack
• Run it and select the flash drive as destination

• Customize the options suitable to your system. This is really the most important thing in the project. You need to understand what does every extension and if you need it or not for your system. You may also need some additional extensions to support your hardware that aren't included with myHack. At the end of the guide you'll find an appendix with an explanation of my selections.

• I highly recommend to obtain a compiled DSDT.aml for your system and better with some fixes applied. It's out of the scope of this guide, but you'll find tons of info in http://www.osx86.es/ and more specifically with the tool DSDTSE. Once you have your dsdt.aml file, you should place it in the root of your flash drive.

Run pfix to repair permissions and rebuild mkext.kext
This step is crucial. You need to re-run pfix everytime you make some changes in the contents of the Extra folder. You'll do it this way:

• Run the terminal app
• Write sudo -s
• Enter the admin password
• Drag and drop the pfix program from the root of your flash drive to the terminal command line and press the enter key.
• It will show a list of every volume in the system. By default it assumes "/" as the root of
• If we're trying to run pfix in the boot volume we should just press enter, but now we need to run it over the "Mac OS Install USB" volume so we'll type /Volumes/Mac OS Install USB after /pfix  (ex-sample : /pfix /Volumes/Mac OS Install DVD 

3rd Step Install Hackintosh using FlashDrive

• Boot from FlashDisk
• I will Prompt you installation page.
• Go to 'Utilities' -> 'Disk Utility'
• Install your Macintosh

If you only use this harddisk as mac os only, GUID partition would be better.


4th First Login to mac

• After the installation done, do restart. Boot from your FlashDisk first.
• Install myHack Package one more time, but put your HDD as the destination.
• Install everything as same as your installation before.
• Restart your machine again. Unplug your FlashDisk.
• Boot from your HardDisk, to make sure everything work well, put in 'Verbose Mode'.
• Welcome to Hackintosh :)

Hopefully this method quite helpful. Feel free to inform me if there is something wrong there ^^


Regards,
феникс